Search results for " Jack"
showing 10 items of 45 documents
Modelling load-transmission mechanisms in axially loaded RC columns retrofitted with steel jackets
2018
The use of steel jacketing technique is a common practice for retrofitting existing reinforced concrete (RC) columns, as it allows increasing load-carrying capacity and ductility of the member. When the external jacket has no-end connections – i.e. the jacket is indirectly loaded- the load sustained by the column is transferred from the inner RC core to the external jacket through shear stresses along the contact surface. The assessment of this mechanism is quite complex, due to the marked non-linear behaviour of constituent materials and to the calibration of a proper shear stress-relative slip constitutive law of the concrete-to-steel interface. In this paper, a step-by-step analytical ap…
Chocolate Consumption and Indicators of Adiposity in US Adults.
2020
International audience; Purpose: The purpose of this research is to investigate the association between consumption of chocolate and measures of adiposity in a large, representative sample of US adults. Methods: Cross-sectional data from 13,626 nondiabetic adults (≥20 years) participating in the National Health and Nutrition Examination Survey study were aggregated using 5 study cycles from 2005-2006 through 2013-2014. Chocolate consumption was determined based on 2 24-hour dietary recalls. Body mass index (BMI) and waist circumference were objectively measured. We used multivariable linear regression to test associations of 1) any chocolate consumption (yes/no), and 2) the total amount of …
Use of fiber-section beam elements for modelling the monotonic flexural response of RC jacketed columns
2021
Abstract The use of reinforced concrete (RC) jacketing is a common technique for retrofitting existing RC columns with poor structural performances. Literature studies highlighted that the relative slip occurring at the interface between the new and the old concrete can affect substantially the flexibility and the strength of the retrofitted member. For this reason, several interface treatments are usually applied, aiming to induce a monolithic behaviour to the column. However, despite the commonness of RC jacketing, a limited number of studies investigated numerical modelling strategies for including these phenomena, especially with reference to the development of numerical models for desi…
Lignans from Torreya jackii identified by stopped-flow high-performance liquid chromatography–nuclear magnetic resonance spectroscopy
1999
Abstract Coupled reversed-phase HPLC–NMR spectroscopy has been applied to the rapid detection and identification of plant metabolites of Torreya jackii , a species of Taxaceae. Analysis consisted of gradient HPLC elution and directly coupled 1 H NMR (500 MHz) spectroscopic detection in a stopped-flow mode. Seven lignans were detected and their structures were elucidated, based on their HPLC– 1 H NMR spectra and MS data. The structures were confirmed by isolation of the single components followed by conventional NMR measurements.
Compressive response of substandard steel-jacketed RC columns strengthened under sustained service loads: From the local to the global behavior
2018
Abstract This paper presents an experimental investigation on substandard partially steel jacketed RC columns strengthened under sustained loads and loaded until failure. The aim of the study is to compare the compressive response of preloaded columns with respect to the tests without preload to obtain a more realistic prediction of load-carrying capacity of structural columns after retrofitting under serviceability loads. The influence of the preload level, the delayed contribution of the confining device during the loading process and the time dependent effects are highlighted for the tested specimens. Based on the experimental observations, an analysis-oriented model is proposed for the …
Strength and ductility of RC jacketed columns: A simplified analytical method
2016
Abstract Reinforced concrete (RC) jacketing is a common method for retrofitting existing columns with poor structural performance. It can be applied in two different ways: if the continuity of the jacket is ensured, the axial load of the column can be transferred to the jacket, which will be directly loaded; conversely, if no continuity is provided, the jacket will induce only confinement action. In both cases the strength and ductility evaluation is rather complex, due to the different physical phenomena included, such as confinement, core–jacket composite action, preload and buckling of longitudinal bars. Although different theoretical studies have been carried out to calculate the confin…
A practical approach for the strength evaluation of RC columns reinforced with RC jackets
2015
Abstract Reinforced concrete (RC) jacketing is nowadays one of the most common techniques adopted for seismic retrofitting of existing RC columns. It is used to increase load-carrying capacity and ductility of weak existing members by means of a simple and cheap method. The structural efficiency is related to two main effects: – the enlargement of the transverse cross section; – the confinement action provided by the external jacket to the inner core. Several theoretical and experimental studies were addressed in the past to investigate on how it is possible to calculate the strength enhancement due to these effects and to highlight the main key parameters influencing the structural behavio…
Frictional effects in structural behavior of no-end-connected steel-jacketed RC columns: Experimental results and new approaches to model numerical a…
2017
Steel jacketing of reinforced concrete (RC) columns is a common retrofitting technique used to restore bearing and deformation capacity of buildings presenting structural deficiencies. For practical reasons, steel angles are in several cases arranged leaving a gap with the end beams or slabs. Despite this disconnection, the angles are still able to support a non-negligible portion of load because of the frictional forces developed along the column-angle contact interface. In these cases, the definition of computational numerical and analytical models for the assessment of reinforced cross sections becomes more complex and must be handled with care. The actual load-carrying capacity of the a…
Concrete softening effects on the axial capacity of RC jacketed circular columns
2016
Abstract Among the different strengthening techniques to repair RC structures, reinforced concrete (RC) jacketing is one of the most commonly adopted, especially for columns. Its wide application is due to its easy application and relatively reduced cost with respect to other methods (e.g. FRP wrapping, Shape Memory Alloy active confinement). The target of RC jacketing is to increase axial, flexural capacity and ductility of weak existing members by means of two main effects: confinement action provided by the jacket and composite action between external jacket and inner concrete. Different theoretical studies have been carried out to calculate the strength enhancement due to confinement ac…
RC column externally strengthened with RC jackets
2013
In this paper the behaviour in compression of RC columns externally strengthened with concrete jacketing is analysed and a cross-section analysis of the jacketed member under axial load and bending moment is developed. The focus was to study the effect of confinement of concrete jacket on concrete core and the behaviour of compressed bars with buckling effects. Some other important aspects such as shrinkage, creep, old to new concrete surfaces and bond split effects were not included in the model because: the use of thick non-shrink grout jacket and a well-roughened surface of old-to-new concrete was supposed; long term effects were included though corrective coefficients for monolithic beh…